Everest

Cable Cleats

Everest

About

High-voltage trefoil cleat system in non-magnetic 316L stainless steel for cables of 100-200 mm, available with a fixed or a sliding base (a floating cleat / intermediate restraint also exists in the range). Designed and tested to IEC 61914. The fixed base holds the cables rigidly; the sliding base lets the cables move sideways so a snaking layout can absorb thermal expansion. Flame-retardant low smoke and fume liners are fitted as standard.

Manufacturer: CMP
  • Third-party certified to IEC 61914
  • Non-magnetic 316L stainless steel, 2 mm material
  • Sunlight (UV) resistant
  • Operating temperature -60 °C to +90 °C
  • Fixed or sliding base
  • Excellent axial and lateral load retention
  • Flame-retardant, low smoke and fume liners
TypeHigh Voltage Trefoil Cable Cleat with Closed Centres
Operating temperature (permanent)-60–90 °C
MaterialNon-magnetic 316L stainless steel, 2 mm thick
Design StandardIEC 61914
Cleat type6.1.3 Composite
Cable formationTrefoil (high voltage)
Needle flame testPass - 120 seconds
Impact resistancePass - Very heavy
Versions in the launch scopeFixed (FX) and sliding (SL) base
UV (sunlight) resistantYes
Short-circuit: one short circuit, 1.4 m spacing with intermediate restraints, 1 s238 kA peak / 92 kA r.m.s.
Short-circuit: two short circuits, 1.4 m spacing with intermediate restraints, 1 s164 kA peak / 64 kA r.m.s.

Similar Products

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.