Cable Cleats
Pre-formed, hinged stainless steel cleat for quad cable formations, in 19 sizes covering cables of 15-71 mm. Designed and tested to IEC 61914 and suited to data centres, rail and other installations where neutral and three-phase conductors are secured together. Fixes with one or two M10 bolts and is fitted with standard polymer liners.
| Type | Quad Application, Heavy Duty Stainless Steel Cable Cleat |
|---|---|
| Operating temperature (permanent) | -60–60 °C |
| Material | 316L stainless steel with standard polymer liner |
| Design Standard | IEC 61914 |
| Cleat type | IEC 61914 6.1.3 Composite QHDSS - Quad Heavy Duty Stainless Steel |
| Cable formation | Quad |
| Needle flame test | Pass - 120 second flame application |
| Axial load | Refer to CMP Products kN |
| Lateral load | Refer to CMP Products |
| Impact resistance | Pass - Very heavy |
| Short-circuit: one short circuit, 300 mm cleat centres, 0.1 s | 189 kA peak / 85.9 kA r.m.s. |
| Short-circuit: one short circuit, 600 mm cleat centres, 0.1 s | 139 kA peak / 63.2 kA r.m.s. |
| Coatings | Epoxy (EC), polyester (PC) or thermoplastic (TC) on request, by adding the suffix to the part number |
| Short-circuit: one short circuit, 300 mm cleat centres, 1 s | 98.2 kA peak / 44.6 kA r.m.s. |
| Short-circuit: one short circuit with Cyclone III strap, 600 mm cleat centres, 0.1 s | 171 kA peak / 77.7 kA r.m.s. |